PF1350

1350VA，AC Source 交流源，实验室电源，两档输出可调，输入和输出均支持400Hz 中频

产品品牌：Behlman

原产地：美国

PF1350
World Wide AC Power Supply / Frequency Converter / Inverter on your bench or test rack

Behlman's PF1350 AC Power Supply / Frequency Converter / Inverter, delivers 1350VA of clean, regulated AC power in a 3.5" high bench top unit, that easily converts to rack mount, for far less cost than competitive models.
The PF1350 can simulate any world wide utility as well as aircraft and shipboard power. Simply select the required frequency, choose a voltage range, dial up your desired voltage, and you are ready to test.
The PF1350 delivers all the quality features you have come to expect from Behlman; clean sinewave output with excellent line and load regulation, high efficiency and low harmonic distortion, in the industries most compact size.

Specifications
Power:		95-270 VAC, @ 16Amps Max. (Full power from 115VAC to 270 VAC)

Input
Voltage:	95-270 VAC, @ 16Amps Max. (Full power from 115VAC to 270 VAC)	Frequency::	47-63 Hz. 47-440Hz (Non CE Mark)

Output
Voltage:	Dual Range; 0 - 135 & 0 -270VAC, full isolation from input.	Frequency:	50Hz, 60Hz or 400Hz
Crest Factor:	3:1	Power Factor:	100% of rated output into any power factor load.
Distortion:	1% TypicalTHD (measured at full load, 115VAC, 60hZ.	AC Regulation:	0.7% @ F.S., No Load to Full load, resistive
Line Regulation:	+/-0.1% for +/-10% line change	AC Regulation Response time:	250 – 300 msec. typical

Protective Circuits
Input Protection:	Fuse.
Constant Current:	Overload automatically causes voltage fold-back to provide maximum current without distorting output waveform
Short Circuit Protection:	Short circuit overload electronically latches output open to protect load... power restored by recycling input power.
Thermal Protection:	Internal temperature sensor prevents heat damage.

Front Panel Display
Power on/off switch Frequency Select Switch Range switch	Volts potentiometer Meter for Volts readout Fault indicator

Mechanical Specifications
Chassis:	High strength bench top chassis
Dimensions:	3.5”H x 17”W x 22”D
Weight:	39lbs
Operating Temperature:	0 Deg C to +55 Deg C
Input Connector:	IEC320 C-20 receptacle with six foot line cord with NEMA 5-15 plug
Output Connection:	European "Schuko" receptacle with NEMA 5-15 adapter. (1)
Supplied with North American line cord with NEMA 5-15 Plug. (1) Other Adapters Available
Options
L:	Locking pot
RM:	Rack Mounting Kit
RO:	Rear Output NEMA 5-15 receptacle
TB:	Rear output enclosed terminal block