TP04-XXXYYYW series Features: ·Universal AC input/ Full range ‧2 pole AC inlet ‧Protections:Short circuit/Over load/Over voltage ‧Fully enclosed plastic ‧Class II power(without earth pin) ‧Pass LPS ‧LED indicator for power on ‧No load power consumption <0.3w ‧ErP step2 compliant (level v) ‧NR Can compliant‧MEPS compliant ‧Meet ELSA2007(Energy Independence and Security Act) ‧2 years warranty
Specification: OUTPUT Model NO TP04-050400 TP04-090300 TP04-120250 TP04-150200 TP04-180166 TP04-240125 DC Voltage Note.2 5V 9V 12V 15V 18V 24V Rated current 4.0A 3.0A 2.5A 2.0A 1.66A 1.25A Current Range 0~4.0A 0~ 3.0A 0~2.5A 0~2.0A 0~1.66A 0~1.25A Rated Power(max) 20W 27W 30W 30W 30W 30W Ripple&Noise(max) Note.3 100mVp-p 100mVp-p 120mVp-p 150mVp-p 180mVp-p 240mVp-p Voltage tolerance Note.4 ±5.0% ±5.0% ±5.0% ±5.0% ±5.0% ±5.0% line regulation Note.5 ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% load regulation ±5.0% ±5.0% ±5.0% ±5.0% ±5.0% ±5.0% setup,rise time Note.7 1000ms,50ms/230VAC 1000ms,50ms/115VAC at full load hold up time(Typ.) 50ms/230VAC 15ms/115VAC at full load INPUT VOLTAGE RANGE 90~264VAC 127~370VDC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 75% 78% 82% 83% 83% 84% AC CURRENT(Typ.) 1.0A/115VAC 0.5A/230VAC INRUSH CURRENT(max.) 50A/230VAC LEAKAGE CURRENT(max.) 0.25mA/240VAC PROTECTION OVER LOAD 120~300% rated output power Protection type:Hiccup mode,recovers automatically after fault condition is removed OVER VOLTAGE 5~7.5V 9.45~13.5V 12.6~18V 15.75~22.5V 18.9~27 V 25.2~36V Protection type:Shut down o/p voltage,re-power on to recover ENVIRONMENT WORKING TEMP. -0~`+40℃(Refer to"Derating Curve") WORKING HUMIDITY 20%~90% RH non-condensing STORAGE TEMP.,HUMIDITY -20~+75℃,10~95% RH TEMP.COEFFICIENT ±0.03%/℃ (0~40℃) VIBRATION 10~500Hz, 2G10min./1cycle,period for 60 min.each along X,Y,Z axes SAFETY & EMC (Note.6) SAFETY STANDARDS UL60950-1,TUV EN60950-1,BSMI CNS14336,CCC GB4943,J60950-1 approved WITHSTAND VOLTAGE I/P-O/P:3KVAC ISOLATION RESISTANCE I/P-O/P, 25℃/70%RH: 100M Ohms/500VDC EMC EMISSION Compliance to EN55022 class B,EN61000-3-2,3,FCCPART15/CISPR22 classB,CNS13438 classB,GB9254,GB17625.1 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11,light industry level,criteria OTHERS MTBF 50K hrs min.MIL-HDBK-217F(25℃) DIMENSION 84*47*32mm(L*W*H) PACKING 0.28Kg; 40pcs/12.02Kg/1.05CUFT CONNECTOR PLUG Standard type P1J:2.1ψ* 5.5ψ*11mm,tuning fork type,other type available by customer requested. CABLE Other type available by customer requested NOTE 1,All parameters are specified at 230VAC input ,rated load, 25℃ 70% HUMIDITY. 2,DC voltage: The output voltage set at point measure by plug terminal & 50% load 3, Ripple& noise are measured at 20MHZ by using a 12"twisted pair terminated with a 0.1uf &47uf capacitor 4,Tolerance: includes set up tolerance, line regulation,load regulation 5,Line regulation is measured from low line to high line at rated load. 6,The power supply is considered as an independent unit,but the final equipment still need to re-confirm that the whole system complies with the EMC directives. 7, Length of set up time is measured at first cold start.Turning on/off the power supply may lead to increase of the set up time
沪公网安备 31011502007471号