ERX-3.3KW-5.5KV

3.3KW，5.5KVDC高压电源

产品品牌：Unipower

原产地：美国

Input
Voltage	230VAC ± 10% Single Ø
Frequency	50/60Hz
Current	20Amps Max at 207V
Output - High Voltage
Voltage	0--5.5kV DC, negative polarity (positive ground)
Current	0-600 mA DC
Regulation	± 0.1% (± 10V)
Ripple	0.05% rms (50V rms) maximum
Power	3.3 kW max
Output - Filament
Voltage	0-7V RMS
Current	0-35 Amps RMS
Frequency	33KHZ +10%
Duty	Continuous
Regulator	±3% (Filament Current)
	±1% (Emission Current)
	Note: Automatic crossover from filament current to emission when HV turns on (customer supplied filament transformer to have isolation >6kV DC)

Chassis Dimensions
Panel	19" W x 10 1/2" H
Chassis	22" Deep
Weight	18.65kG, 50Lbs.
Input Connection	Power Cable, Phase orientation not critical
Output Connection	Coaxial cable with the shield grounded
Indoor Use
Altitude	7500 Ft. Max
Humidity	Non-Condensing
Temperature	40° C Max Ambient
Transient Voltage	Category II
Pollution Degree @	In accordance with IEC 664

10kw – ERC

Control – “Local”
Main Circuit Breaker
HV – ON	Push Button – White
Voltage Set	Potentiometer
HV – OFF	Push Button – Green
Local Filament ON	Push Button – White
Emission Current Set	Potentiometer – 10 Turns
Indicators	Power On
	Remote Mode
	Interlock Open
	Arc
	Over-current
	Fault
	Ready for High Voltage
	High Voltage On
Meters	3.5 Digit LCD Type
	Voltage “10.00” kV
	Current “600” mA
Control - "Remote"
“25 Pin D” Connector	Power Supply to Remote
	24V DC Fused Output
	HV – On Response
	Fault Response
KV Monitor	0-10V = 1-5KV
MA Monitor	0-6V = 0-600mA
Filament Current Monitor	0-10V = 0-5kV
Remote to Power Supply	24V Remote Command
	24V on Command
	Filament ON/OFF Command (24V DC = ON)
Remote Emission Current Reference	BNC jack: Rear Panel
	Interlock: Contact Closure Required
	HV “ON” Response

产品留言